Specials
The Saramonic SR-C2001 is a short adapter cable with an USB Type-C connector on one end, and a male 3.5mm TRS plug on the other. Allowing users to connect a multitude of audio sources and equipment to the USB-C port on Smartphones, Tablets, Computers and more.
The Saramonic SR-C2000 is a short adapter cable with an Apple Lightning connector on one end, and a male 3.5mm plug on the other. Allowing users to connect a multitude of audio sources and equipment to the Lightning port of an Apple iPhone or iPad.
The Saramonic SR-C2004 is a short cable that lets you connect two 3.5mm wireless receivers, or audio sources into a single 3.5mm mic input of a camera, mixer, recorder or other device. It has two locking 3.5mm male connectors and ends in a single right-angle 3.5mm male connector.
The Saramonic SR-CS350 is a 2 pack of 1/8” (3.5 mm) Male Stereo TRS to 1/8” (3.5mm) Male Stereo TRS Output Connector Cables. These cables are designed to allow you to connect Wireless Systems, Microphones, Audio Adapters and Mixers with Female 1/8” (3.5 mm) TRS Jack to a DSLRs, Mirrorless Cameras, Camcorders or Recorders which have a Female 1/8” (3.5 mm) TRS Jack.
The SR-25C35 is short adapter cable designed for the output of any powered or dynamic microphone, mixer or adapter with a 3.5mm output to plug into select Fuji cameras or any device with a 2.5mm input.
The Saramonic C-XLR+ is a useful audio adapter that lets you easily connect microphones and audio sources that have 3.5mm male jacks into the XLR inputs on professional video and cinema cameras, audio recorders, mixers, and more. It's compatible with active, battery-powered microphones and passive microphones, such as the lavalier mics that come with wireless systems. If you engage phantom power on the camera or other device, a built-in converter in the C-XLR+ changes the current from +48-volts to the 3 to 5-volt current that plug-in-powered and some passive 3.5mm microphones require. This happens automatically. There are no controls on the C-XLR+ that need your attention.
The Saramonic AX1 is an incredibly compact and lightweight battery-free 2-channel microphone and audio mixer. It features two 3.5mm TRS inputs with dedicated input level attenuators and a single 3.5mm TRS output with selectable Mono/Stereo output switch. It also includes both 3.5mm TRS and TRRS output cables. Making it an ideal mixer solution for DSLR, Mirrorless and Video Cameras, Smartphones, Handheld Recorders, Laptops and much more. Weighing less than half an ounce and less than 2” wide, it can easily be added to any ultra-compact set up, without adding excessive weight and bulk.
The Saramonic SR-XM1 is an ultra-compact condenser microphone that captures crystal clear broadcast-quality sound, even though it weighs less than an ounce. It was designed to be plugged directly into the 1/8” (3.5mm) Microphone Input on DSLR, Mirrorless and Video cameras to add a low-profile yet high-quality microphone and drastically improve the sound over those camera's included microphone. In addition, it's compatible with the Saramonic UWMIC9, UWMIC10, and UWMIC15 transmitters as well as the SmartRig+ series and LavMic. The SR-XM1 is also the replacement microphone accessory for the CaMixer and SmartMixer.
The Saramonic SR-XLR35 is a microphone cable with a standard female XLR connector on one end, and an 1/8“ (3.5mm) TRRS connector at the other end -- which enables you to plug professional microphones directly into mobile devices (smartphones and tablets) as well as cameras (DSLRs, mirrorless, and video cameras). Using the SR-XLR35 is incredibly easy. You just connect an XLR microphone, select either camera mode or mobile device mode, plug it in and start recording.
The Saramonic LavMicro is a wired omnidirectional clip-on lavalier microphone that delivers broadcast-quality sound and can be used with DSLRs, mirrorless and video cameras, as well as audio recorders, smartphones, tablets, and other devices. An included 1/4” adapter even lets you use it with cameras like the Blackmagic Design Cinema Camera. The LavMicro features a 20-foot (6m) cable, which gives you ample room to position your subject in front of the camera.