The ProMaster Dovetail Macro Sliding Rail fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. The base of the rail attaches to a dovetail tripod head and can be slid back and forth for best positioning.

The Dovetail QR Panning Clamp adds a 360-degree upper panning ability to a tripod head, and fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. There are two ways of attaching the Dovetail QR Panning Clamp to a tripod head. It has a dovetail plate attached to its base which allows it to connect to any Arca-type receiver. Alternatively, the dovetail base can be removed; exposing a 3/8”-16 threaded port for mounting.

For years, traditional tripods have suffered from needless bulk and wasted space. We spent 4 years redesigning the tripod from the ground up, creating a travel tripod that packs down to the diameter of a water bottle--without compromising height, stability, or features.

For years, traditional tripods have suffered from needless bulk and wasted space. We spent 4 years redesigning the tripod from the ground up, creating a travel tripod that packs down to the diameter of a water bottle--without compromising height, stability, or features.

SmallRig L-Bracket for Nikon Z6 and Nikon Z7 Camera apl2258 is a modular design with anti-twist flanges to keep the camera from twisting. The bottom plate add 16.5mm height based on the original handgrip for pinky support. Both the base plate and side plate are Arca-type compatible dovetail plates enable the camera to mount in a vertical or horizontal position. It features a sensor centering line on each axis to align the camera on a tripod head and maintains complete access to the camera's battery and ports.

RAMA2 is an adjustable arm designed for use with a number of desired accessories. With a maximum payload 22lbs there are not many accessories that this arm can't hold. The folded size is 5.5 inches. The weight is 0.75 lbs and is suitable for mounting larger items such as monitors and larger lights due to the length of the arm. The arm has a 1/4”-20 standard thread.

RAMA1 is an adjustable arm designed for use with a number of desired accessories. With a maximum payload 22lbs there are not many accessories that this arm can't hold. The folded size is 3.5 inches. The weight is 0.5 lbs and is suitable for mounting smaller items such as microphones and lights due to the length of the arm. The arm has a 1/4”-20 standard thread.

The Gitzo Mountaineer Carbon Fiber Tripod kit with 3-Way Fluid Head is designed to deliver precise and versatile framing for photographers. It is perfect for; Landscape Photographers who require precise framing and fine-tuned compositions. (ie. Horizons) Studio Photographers who images through precise framing. Architectural Photographers who experiment with angles to achieve different and creative perspectives. Offers great working versatility as well as precise framing for creative photography.

In the wake of the collaboration between Vitec Group and Sony announced during Gitzo's 100th anniversary celebrations, Gitzo presents a best in class product developed especially for Sony α7 and α9 cameras: the Traveler α tripod, addressing professional photographers and premium camera users.

The Gitzo 3 Way Fluid Head is designed to deliver precise and versatile framing for photographers. It is perfect for; Landscape Photographers who require precise framing and fine-tuned compositions.(ie. Horizons) Studio Photographers who images through precise framing. Architectural Photographers who experiment with angles to achieve different and creative perspectives. Offers great working versatility as well as precise framing for creative photography.

Every Platypod needs bendable necks to hold onto their 1/4-20” accessories. Our goosenecks come in stackable pairs.

The PROMASTER XC-MH30 BALL HEAD is well featured, technical ball head with incredible strength in a compact and lightweight form factor. It is made of machined (not cast) high grade aluminum.

The PROMASTER XC-MH26 BALL HEAD is well featured, technical ball head with incredible strength in a compact and lightweight form factor. It is made of machined (not cast) high grade aluminum.

This shoulder strap works with all ProMaster XC-M tripods. It quickly attaches the the machined strap slot in the yoke of an XC-M tripod using a quick release buckle. The other side of the strap slides around the lower portion of the tripod's legs like a lasso.

The ProMaster Hipster and Strap works with all models of XC-M tripods. This unique system offers multiple ways of carrying a tripod. There are two parts to this system, the Hipster and the strap.

The PROMASTER 3510 ALL TERRAIN FEET are a serious upgrade for any XC-M tripod. Once the standard feet are removed (simply pull them off the bottom of each XC-M leg while applying a little bit of wiggle action) you can install the stainless-steel spikes into the threaded port found at the bottom of each XC-M leg. An included wrench will help you to tighten the spikes in place. These spikes are great for solid footing on ice, dirt, grass, and more. But what if you find your XC-M's legs sinking into . . . .

The PROMASTER XC-M 525C tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Yet, fully extended it reaches an incredible working height of nearly 6'! Each leg's angle and length are independently adjustable, allowing the XC-M 525C to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control . . . .

The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .

The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .

The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .

The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .

The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .

The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .

The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .

These Carbon Fiber Extension & Macro Legs work with XC-M 525 tripods. After removing all 3 of the XC-M 522's legs they attach in their place. Now you have a choice to either reattach the legs to these extensions for added height OR attach the 3 soft feet (included) to the extensions to convert your tripod into a lightweight, super-strong macro tripod.

This is a replacement, retractable weight hook for any XC-M 525 aluminum or carbon fiber tripod. It connects to the bottom of the center column and allows you to attach additional weight to the tripod to improve its stability.

Set of 3 replacement standard feet for any XC-M 525 aluminum or carbon fiber tripod. These are a great, inexpensive replacement set if you happen to lose or damage the standard feet on an XC-M 525 tripod.

This 3 piece Leg Warmer set is specifically designed for use with ProMaster XC-M 525 and XC-M 525C tripods. They protect your tripod from scratches and make handling your tripod more comfortable, especially in cold weather.

This Carbon Fiber Ground Level Adapter is a great accessory for getting an XC-M 525 tripod lower and closer to the ground for macro photography and a unique perspective. In less than 30 seconds your XC-M 525 can achieve a stable position as low as just 6 1/4" / 15.88 cm.

This Aluminum Ground Level Adapter is a great accessory for getting an XC-M 525 tripod lower and closer to the ground for macro photography and a unique perspective. In less than 30 seconds your XC-M 525 can achieve a stable position as low as just 6 1/4" / 15.88 cm.