Specials
Two Aluminum Construction durable arms with ¼” -20 and Cold Shoe PRO mounts for adding accessories to GorillaPod and other Rigs.
RAMA2 is an adjustable arm designed for use with a number of desired accessories. With a maximum payload 22lbs there are not many accessories that this arm can't hold. The folded size is 5.5 inches. The weight is 0.75 lbs and is suitable for mounting larger items such as monitors and larger lights due to the length of the arm. The arm has a 1/4”-20 standard thread.
RAMA1 is an adjustable arm designed for use with a number of desired accessories. With a maximum payload 22lbs there are not many accessories that this arm can't hold. The folded size is 3.5 inches. The weight is 0.5 lbs and is suitable for mounting smaller items such as microphones and lights due to the length of the arm. The arm has a 1/4”-20 standard thread.
It is equipped with 1/4'' screws on both ends respectively. Thus, it could attach monitor via the 1/4'' screw on the one end and attach accessories with 1/4''-20 threaded holes on the other end, like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. Mounted with 1/4'' screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.
The Rock Solid Articulating Arm is designed to hold a variety of devices including iPads, tablets, phones, and other lightweight fixtures solidly in place.
This handy, versatile accessory allows you to mount almost anything with a 1/4'' thread onto a anything with a shoe of 1/4'' thread. Our Articulating Accessory Arm allows you to mount LCD panels and microphones on your DSLR for cinematography and has double ball heads to provide complete control over positioning. You could even use the arm to mount another small camera on your current camera to gain a new perspective.
The Rock Solid Master Articulating Arm is a fully adjustable arm designed for positioning a tablet, small monitors, camera, light, flash and many other accessories in the optimal position. The dual 5/8” studs integrate with numerous standard photo and film clamps, platforms and tools used to mount equipment, including Tether Table Aero, Connect iPad Bracket, Rock Solid Camera Platform and Local Vu Monitor Mounts.
These new articulating arms are the perfect complement to the Pico Dolly shown above. The arms have two nicely machined metal sections. The lower section has a locking accessory show mount. Or you can remove the shoe and use it with either a 1/4x20 female or male thread, so it fits any need.