Melrose, MA  |  Cambridge, MA   |  Boston, MA  |  Holyoke, MA  |   Hanover, MA  |  Manchester, NH  |   S.Portland, ME  |  Providence, RI
| My Account | Specials | Customer Service |
CATEGORIES
BRANDS
  SORT BY NEXT PAGE
Promaster
Tripods and Monopods
#PRO5554 Promaster QR Plate 200mm Long Lens Arca-Swiss
ProMaster's Long Lens Plate is used to balance long lenses and heavy or awkward camera rigs on gimbal heads, ball heads, and cine/video heads. The extra length of this plate allows it to slide back and forth in a dovetail head (arca-type) until the proper balance point is found. Then it is locked in place for the best stability when using movements on the head.
$44.95
#PRO1190 Promaster Crazy Legs Bendable Mobile Tripod w/ Ball Head + Phone Mount
This tripod uses bendable, wrappable legs to hold your camera or phone in the craziest places, and it switches between camera-mode and smartphone-mode in seconds.
$39.95
#PRO1025 Promaster Large Clip Clamp
The ProMaster Large Clip Clamp is a convenient tool for mounting all kinds of stuff in all sorts of places. The large, powerful jaws hold tight against the bars of light stands, booms, and backdrop crossbars, as well as table edges, tripod legs, tree branches, park benches, lampposts, and more.
$14.95
#PRO3426 Promaster XC-M 522K Professional Tripod Kit with Head (Red)
The PROMASTER XC-M 522 tripod's 5-section, transverse legs fold 180° making the entire unit just over 12" long for storage and travel. Yet, fully extended it reaches a comfortable working height. Each leg's angle and length are independently adjustable, allowing the XC-M 522 to properly support your camera on uneven ground.
$159.95
#PRO6338 Promaster Hitchhiker Convertible Tripod
You're going to want to take along a Hitchhiker everyplace you go. Whether you are carrying a camera, a smartphone, or both… whether you are capturing still shots, video footage, or both… whether you need a tripod or a handheld stabilizer, the Hitchhiker does it all!
$39.95
#PRO1788 Promaster 360 Degree Dovetail or Panning Clamp
The Dovetail QR Panning Clamp adds a 360-degree upper panning ability to a tripod head, and fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. There are two ways of attaching the Dovetail QR Panning Clamp to a tripod head. It has a dovetail plate attached to its base which allows it to connect to any Arca-type receiver. Alternatively, the dovetail base can be removed; exposing a 3/8”-16 threaded port for mounting.
$99.95
#PRO1802 Promaster Dovetail Macro Sliding Rail
The ProMaster Dovetail Macro Sliding Rail fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. The base of the rail attaches to a dovetail tripod head and can be slid back and forth for best positioning.
$99.95
#PRO3692 Promaster XC-M 522C Carbon Fiber Tripod & Monopod (Silver)
The ProMaster XC-M 522C tripod's 5-section, transverse legs fold 180° making the entire unit just over 12" long for storage and travel. Fully extended it reaches a comfortable working height. Each leg's angle and length are independently adjustable, allowing the XC-M 522C to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's . . . .
$239.95

Notify when available
#PRO3405 Promaster XC-M 522C Aluminum Tripod & Monopod (Black)
The ProMaster XC-M 522 tripod's 5-section, transverse legs fold 180° making the entire unit just over 12" long for storage and travel. Fully extended it reaches a comfortable working height. Each leg's angle and length are independently adjustable, allowing the XC-M 522 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's . . . .
$159.95
#PRO4077 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Blue)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO3475 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Orange)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO3468 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Red)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO3601 Promaster Set of 3 Leg Warmers for ProMaster XC-M 525 and XC-M 525C Tripods
This 3 piece Leg Warmer set is specifically designed for use with ProMaster XC-M 525 and XC-M 525C tripods. They protect your tripod from scratches and make handling your tripod more comfortable, especially in cold weather.
$15.95

Notify when available
#PRO3447 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Black)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO3510 Promaster XC-M All Terrain Feet (Set of 3)
The PROMASTER 3510 ALL TERRAIN FEET are a serious upgrade for any XC-M tripod. Once the standard feet are removed (simply pull them off the bottom of each XC-M leg while applying a little bit of wiggle action) you can install the stainless-steel spikes into the threaded port found at the bottom of each XC-M leg. An included wrench will help you to tighten the spikes in place. These spikes are great for solid footing on ice, dirt, grass, and more. But what if you find your XC-M's legs sinking into . . . .
$29.95

Notify when available
#PRO3587 Promaster XC-M Hipster & Strap
The ProMaster Hipster and Strap works with all models of XC-M tripods. This unique system offers multiple ways of carrying a tripod. There are two parts to this system, the Hipster and the strap.
$29.95

Notify when available
#PRO3580 Promaster XC-M Shoulder Strap
This shoulder strap works with all ProMaster XC-M tripods. It quickly attaches the the machined strap slot in the yoke of an XC-M tripod using a quick release buckle. The other side of the strap slides around the lower portion of the tripod's legs like a lasso.
$19.95

Notify when available
#PRO3489 Promaster XC-MH26 Ball Head (Black)
The PROMASTER XC-MH26 BALL HEAD is well featured, technical ball head with incredible strength in a compact and lightweight form factor. It is made of machined (not cast) high grade aluminum.
$79.95

Notify when available
#PRO3461 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Yellow)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95

Notify when available
#PRO3454 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Silver)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95

Notify when available
#PRO4028 Promaster Column Tilt Adapter For the Promaster XC-M 525 Tripods
This Column Tilt Adapter expands the capability of your XC-M 525 aluminum or XC-M 525C carbon fiber tripod by giving its center column the freedom to tilt 180° (90° up & 90° down). This adapter essentially converts your XC-M's center column into a multi-position, adjustable boom.
$34.95
#PRO3531 Promaster Aluminum Ground Level Adapter for Promaster XC-M 525 Tripod
This Aluminum Ground Level Adapter is a great accessory for getting an XC-M 525 tripod lower and closer to the ground for macro photography and a unique perspective. In less than 30 seconds your XC-M 525 can achieve a stable position as low as just 6 1/4" / 15.88 cm.
$15.95

Notify when available
#PRO3538 Promaster Carbon Fiber Ground Level Adapter for Promaster XC-M 525 Tripod
This Carbon Fiber Ground Level Adapter is a great accessory for getting an XC-M 525 tripod lower and closer to the ground for macro photography and a unique perspective. In less than 30 seconds your XC-M 525 can achieve a stable position as low as just 6 1/4" / 15.88 cm.
$19.95

Notify when available
#PRO3496 Promaster XC-MH30 Ball Head (Black)
The PROMASTER XC-MH30 BALL HEAD is well featured, technical ball head with incredible strength in a compact and lightweight form factor. It is made of machined (not cast) high grade aluminum.
$89.95
#PRO3440 Promaster XC-M 522C Carbon Fiber Tripod & Monopod (Black)
The ProMaster XC-M 522C tripod's 5-section, transverse legs fold 180° making the entire unit just over 12" long for storage and travel. Fully extended it reaches a comfortable working height. Each leg's angle and length are independently adjustable, allowing the XC-M 522C to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and uses ProMaster's . . . .
$239.95

Notify when available
#PRO3559 Promaster Aluminum Extension & Macro Legs for Promaster XC-M 525 Tripods
These Aluminum Extension & Macro Legs work with XC-M 525 tripods. After removing all 3 of the XC-M 522's legs they attach in their place. Now you have a choice to either reattach the legs to these extensions for added height OR attach the 3 soft feet (included) to the extensions to convert your tripod into a lightweight, super-strong macro tripod.
$29.95

Notify when available
#PRO3713 Promaster Weight Hook for Promaster XC-M 525 Tripods
This is a replacement, retractable weight hook for any XC-M 525 aluminum or carbon fiber tripod. It connects to the bottom of the center column and allows you to attach additional weight to the tripod to improve its stability.
$5.95

Notify when available
#PRO3566 Promaster Carbon Fiber Extension & Macro Legs for Promaster XC-M 525 Tripods
These Carbon Fiber Extension & Macro Legs work with XC-M 525 tripods. After removing all 3 of the XC-M 522's legs they attach in their place. Now you have a choice to either reattach the legs to these extensions for added height OR attach the 3 soft feet (included) to the extensions to convert your tripod into a lightweight, super-strong macro tripod.
$39.95

Notify when available
#PRO3482 Promaster XC-M 525C Carbon Fiber Tripod/Monopod with XC-MH30 Ball Head (Black)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$269.95

Notify when available
#PRO3706 Promaster Weight Hook for Promaster XC-M 522 Tripods
This is a replacement, retractable weight hook for any XC-M 522 aluminum or carbon fiber tripod. It connects to the bottom of the center column and allows you to attach additional weight to the tripod to improve its stability.
$5.95

Notify when available
  SORT BY NEXT PAGE
LOCATIONS CUSTOMER SERVICE RESOURCES CONNECT
Sign Up for Special Deals
©Copyright 2020. Hunt's Photo & Video