For remotely triggering a camera from Sony cameras with Sony's multi/micro USB port and controlling half-press function using certain PocketWizard radios.

Compatible with Alpha cameras from Sony that have the multi/micro USB port

The S-VPR1-ACC is a special remote shutter release cable called a pre-trigger cable. A pre-trigger cable controls both the half-press and full-press function of your remote camera's shutter release. When a camera is “pre-triggered”, it is like holding your camera's shutter release button in the half-pressed or metering/focusing position.

This –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.

NOTE: This cable is fully compatible with the MultiMAX and Plus III radios. It has limited compatibility with most other PocketWizard radios. If you have a different PocketWizard radio, we suggest the 13369-S remote camera cable.

Will your remote camera be set up for an extended period of time? The 13369-S remote camera cable also has a USB port so you can connect an external power supply to power your camera.

How to use:
1. Connect the 3.5mm miniphone end of this cable to the receiving Pocketwizard's sync port and connect the multi/micro USB port of the cable to Sony's remote port.
2. Turn on all of your equipment and make sure the Channels match.
3. Press the test button on the transmitting PocketWizard radio to trigger the receiving PocketWizard and your remote camera.

Specs:
Cable length: 1 feet (1')
From: 1/8" (3.5 mm) stereo miniphone
To: Multi/micro USB port of Sony's cameras

PocketWizard compatibility:

• Plus III (requires firmware 1.212 or higher)
• MultiMAX
• MultMAX II (requires firmware 8.117 or higher)

• This cable may have limited compatibility with other PocketWizard radios. We suggest using the 13369-S remote camera cable.

Half-press and Pre-trigger functions

Half press keeps the camera awake as long as you are half pressing the test button. This is available when using a Plus III as a transmitting radio and a Plus III radio as a receiving radio with Channels 17-32.

Pre-trigger keeps the camera awake constantly. This is available when using a MultiMAX or MultiMAX II as a transmitting radio and a MultiMAX or MultiMAX II as a receiving radio with Channels 17-32. Pre-trigger function is also available with any PocketWizard radio by adding the PTMM adapter.