Photogenic
Photogenic Powerlight Pl1250dr
MFR# PL1250DR
Out of Stock
| Specifications | |
| Optional side display of power | Yes |
| Optional side display with push button power control | Yes |
| Optional side display with Infrared receiver for use with handheld remote control | Yes |
| Optional Computer Control | Yes |
| Separate Light head and Power Supply | No |
| Quick-Change accessory system | Yes |
| Digital Control Panel | Yes |
| Rugged aluminum housing | Yes |
| Available in Kits | Yes |
| Positive flash indication via model lamp | Yes |
| User replaceable flashtube | Yes |
| Separate modeling switch | Yes |
| Fan Cooled | Yes |
| Flash Ready Light | Yes |
| Flash Power | 500 Watt Seconds, 500 Joules |
| Recycling Time | 0.5 to 1.5 seconds recharge |
| Flash Duration | 1/1300 second at full power |
| Power Control | Full to 1/32 range (6 f-stops), 0.1 f-stop resolution digital display |
| Modeling Light Power | 250 Watt Quartz, ESS |
| Modeling Light Control | Full to 1/32 range, 0.1 f-stop resolution, Line voltage regulated |
| Triggering | Built in Photo Slave Synchronization Jack 5 volt isolated, push to test button |
| Main Supply | 105-125 VAC, 60 Hz, 15 Amp |
| Current Consumption | 0.2 amps idling, 15 amps charge |
| Voltage Stabilization | Plus or minus 0.05 f-stop |
| Overload Protection | Fuse 3AG type, 16 Amp, SLO-BLO |
| Weight | 5 pounds, 8 ounces |
| Dimensions (housing) | 4.5'' x 4.5'' x 6.75'' |
| Guide Number | With ISO 100 is 365 |
| BCPS | 25,000 |
Free Shipping *Most purchases over $75