Replacement lens hood for Canon ES-68

Replacement lens hood for Nikon HB-N106

Replacement hood for Canon EW-53

Replacement lens hood for Canon ET-60

Replacement hood for Nikon HB-77

Replacement hood for Nikon HB-90A

Replacement hood for Canon EW-73D

The ProMaster XC-M 528 tripod's 5-section, transverse legs fold 180° making the entire unit just 16 1/2" long for storage and travel. Fully extended, it reaches a working height of over 6.5'! Each leg's angle and length are independently adjustable, allowing the XC-M 528 to properly support your camera on uneven ground. A two-stage center column allows you to maximize working height without sacrificing the tripod's compact size. The center column is reversible, and the weight hook can help

The ProMaster Multi-Format Memory Case provides flexible storage for today’s memory cards in a thin, lightweight form factor. Two independent partitions allow you to mix and match the formats you want to carry. The inserts slide easily into the case’s compartments and can be affixed more permanently with the included double-sided adhesive. Forego a foam insert, and you can store standard-sized business cards in the compartment of your choice. A variety of organizational labels are also included.

Converts a 1/4"-20 male screw/post to 3/8"-16 male. This adapter is made of premium brass and has a knurled finish, making it easy to attach and remove.

The ProMaster Small Block is a tiny, rechargeable, weather-resistant LED light. It utilizes a Chip-on-Board (COB) light source that reduces the specular highlights and shadows sometimes produced by multi-diode LED arrays. The Small Block offers a beautiful 5600K daylight color balance and has a TLCI rating of 95+. At maximum power, this tiny light puts out an impressive 325 lux at 1 meter.

Converts a 1/4"-20 female port to 1/4"-20 male. This adapter is made of premium brass and has a 16mm hex nut in the center section, making it easy to attach and remove.

The ProMaster SD Memory Card Reader is reliable and easy to use. It can read and write to Secure Digital memory cards including SD, SDHC, and SDXC formats. Its single SD slot is compatible with UHS-I and UHS-II cards and reads at UHS-I speeds. The attached USB-A cable connects to most computers.

The ProMaster Specialist R19RGB light has all of the benefits of a ringlight: reducing shadows and producing soft illumination and pleasing round catchlights in your subject's eyes. This 19-inch ringlight has an output power of 1,050 lux at 3', and its 120-degree beam angle spreads the light over a broad area. In bi-color mode, the color temperature of this light is adjustable from a warm 3200K to a cool 5600K. The Specialist R19RGB boasts CRI and TLCI ratings of 98+, ensuring accurate color rendition

The Pop-up Background and Reflector Stand extends up to 8’ tall. Spring-loaded grips at the top and base of the stand securely hold the internal frame of a pop-up background or reflector. With a folded length of 25 inches and a weight of under three pounds, the Pop-up Background and Reflector Stand is as portable as the equipment it holds. * Background disc shown for illustration purposes only and is not included.

A direct replacement for the Nikon DK-29 Eyecup. The ProMaster 2508 eyecup has a soft cushion surrounding it for comfortable viewing, especially for eyeglass wearers. It helps to shield light, making it easier to see the viewfinder.

The ProMaster Battery & Charger Kit is a terrific companion for ensuring you always have plenty of power for your camera. It includes a Dually charger, an AC adapter, and a high-quality lithium-ion battery for use in cameras that accept the Sony NP-FW50.

The ProMaster Battery & Charger Kit is a terrific companion for ensuring you always have plenty of power for your camera. It includes a Dually charger, an AC adapter, and a high-quality lithium-ion battery for use in cameras that accept the Sony NP-FW50.

This Battery & Charger Kit includes a battery for Sony's NP-BX1, a Dually Charger, and a high-quality USB-A wall charger. The ProMaster Battery & Charger Kit is a terrific companion for ensuring you always have plenty of power for your camera. It includes a Dually charger, an AC adapter, and a high-quality lithium-ion battery for use in cameras that accept the Sony NP-BX1.

The ProMaster Mini Light Stand is strong, lightweight, and compact. Designed for projects that require light at low or mid-level heights, it has a useable height range of 1.5 to 4 feet. At the top of the stand is a 5/8" stud with a 1/4 "-20 threaded post. * Light shown in photo is not included

The ProMaster 1340 Bluetooth Remote Control for Nikon replaces the functions of the ML-L7. It connects to a variety of Nikon cameras and provides features such as: shutter release, movie record, a multi selector, Fn1 & Fn2, and more. Its functionality will vary by camera and lens model.

Thanks to its convertible ball head with an integrated phone clamp, the Hitchhiker XL converts between camera and smartphone modes in just seconds. When in smartphone mode, a cold shoe is revealed for conveniently mounting an accessory such as a light or microphone.

The GH31C uses a lightweight, high-strength carbon fiber material for its main body and CNC-machined aluminum for other parts. The result is a lightweight unit with an impressive maximum load of 33 lbs / 15 kg. The carbon fiber design also helps to reduce vibrations when compared to an all-metal gimbal and is easier to handle in freezing temperatures.

The ProMaster Famous Shoes Ball Head is a precision-engineered, micro-sized multitool for photographers and videographers. It is incredibly compact and lightweight at just two inches tall and less than 1/7th of a pound, but holds up to 11 pounds! A repositionable single-action lever controls the ball and socket, as well as 360-degree rotation at the base.

The ProMaster Battery & Charger Kit is a terrific companion for ensuring you always have plenty of power for your camera. It includes a Dually charger, an AC adapter, and a high-quality lithium-ion battery for use in cameras that accept the Nikon EN-EL15c. The Dually charger can be connected directly to a USB-A port (2.2A min), opening a world of possibilities for where and when you can charge your batteries including: at home, in a car, while traveling, and more. You can use the Dually charger