Sprig Holder (1/4"-20)

The Sprig Holder keeps your Sprigs at hand during fast-paced shoots. Features three pass-through 1/4"-20 holes, allowing you to insert a Sprig in each side, holding six in total. 3D printed in PLA. Note: This product does not include any Sprigs and is for the keychain only.

Saramonic SR-XLR35 XLR Female to 1/8” (3.5mm) TRRS Microphone Cable Interface

The Saramonic SR-XLR35 is a microphone cable with a standard female XLR connector on one end, and an 1/8“ (3.5mm) TRRS connector at the other end -- which enables you to plug professional microphones directly into mobile devices (smartphones and tablets) as well as cameras (DSLRs, mirrorless, and video cameras). Using the SR-XLR35 is incredibly easy. You just connect an XLR microphone, select either camera mode or mobile device mode, plug it in and start recording.

Viltrox NF-FX1 Lens Mount Adapter for Nikon G/F/AI/S/D Mount Series Lens to Fuji X-Mount Camera's (Manual Focus)

NF-FX1 Lens Mount Adapter for Nikon G/F/AI/S/D Mount Series Lens to Fuji X-Mount Camera's. Manual focus, infinity lock, 1/4" detachable tripod mount, and manual aperture control.

Saramonic Battery-Free 2-channel On-Camera 1/8” (3.5mm) Audio Adapter and Mixer

The Saramonic SR-AX100 is an ultra-compact, two-channel audio mixer that makes it possible to connect and mix two microphones to DSLR, mirrorless, and video cameras that only have a single mic input and it doesn't require power to operate. A built-in shoe mount on the base lets you attach the AX100 to your camera, and a 1/4-20 tripod thread makes it possible to easily attach it to camera cages, tripods and more.

Nisi 62mm PRO Nano HUC UV Filter

• Ultraviolet absorption optical glass
• Brass Frame constructed with highly accurate Brass milling.
• Exclusive creative "U" type Nano coating.
• Hardened waterproof coating.
• Top-level optical surface machining accuracy.
• Ultra-thin: Minimize vignetting effect on wide-angle lenses
• High-quality optical glass for high transmittance and highly smooth surface
• Protect the lens from dust, damage to the front element
• Easy to clean

Godox 55" Octagon Softbox with Bowens Mounting

Parabolic Softbox P90 Series adopt deep parabolic box design, which enables light to be sent out straightly and brightness to be decreased progressively from central to periphery, thus offering extremely even, soft, and saturation light effects for shooting with easy installation, simple operation, great portability, and a wide variety of applications.

Aputure 4-Leaf Barndoors

Designed specifically for Aputure COB lights, the Aputure Barn Doors are the optimal solution for shaping your light and preventing excess spill, featuring four velvet leaves, a newly designed negative reflector dish, and a high quality gel holder.

Saramonic 2M Dual Wired Lavalier Microphones to 1/8” (3.5mm)

The Saramonic LavMicro M2 is a set of two high-quality clip-on wired lavalier microphones that share one cable and connect to a single 1/8“ (3.5mm) mic input. This enables you to put wired lavalier mics on two people and plug into a single mic input on a camera or an audio recorder. The microphones deliver broadcast-quality sound to DSLRs, mirrorless, cinema, and video cameras, as well as audio recorders, smartphones, tablets, and other devices. It features a 23-foot (7m) cable, which gives you plenty of length to position subjects in front of a camera, around a table for a podcast recording, etc.

Smallrig Cage for Canon 5D Mark III IV

The SmallRig CCC2271 is a custom and form-fitted cage designed to provide an all-around protection and mounting options for Canon 5D Mark III IV. It locks camera firmly via 1/4'' screws at the bottom. And it protects camera from twisting and scratching. Attached Slotted screwdriver on the bottom of the cage provides convenience for you to lock and unlock camera. The cage maintains the battery door, ports and buttons of camera access.

Hasselblad X system Rechargeable Battery (f/ X1D & X2D)

Hasselblad X system rechargeable Li-on battery