SmallRig Super Clamp with 1/4" and 3/8" Thread (2pcs Pack) 2058 is lightweight and durable. It could lock 15mm-44mm rods, which could be tightened by locking lever. It could be mounted onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps very stably. It is equipped with 1/4'' and 3/8'' threaded holes for DIY operations.

SmallRig Multi-Functional Crab-Shaped Clamp with Ballhead Magic Arm 2164 includes Universal Magic Arm 2163 and Super Clamp 735. It could attach monitor or video light on the other end, while clamps the accessories with diameter less than 54mm, like DJI stabilizer, Freefly stabilizer, video C-stand etc. It features a wingnut in the middle to adjust the angles and positions of monitor or video light or other accessories.

It is equipped with 1/4'' screws on both ends respectively. Thus, it could attach monitor via the 1/4'' screw on the one end and attach accessories with 1/4''-20 threaded holes on the other end, like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. Mounted with 1/4'' screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.

SmallRig QR L-Bracket for Canon EOS R5, R6, and R5 C features an ultra-slim design to reduce the burden of photographers during hiking and climbing. Not only lightweight design but also full functions. On top of this, it is convenient and easy for photographers to remove the side plate to attach a flip screen or install it back when shooting or a side power supply is needed, enabling quick assembly and disassembly. Its bottom design fits perfectly into the camera for a greater grip experience.

SmallRig L Bracket for Nikon Z5/Z6/Z7/Z6 II/Z7 II Camera 2947 is modular designed with anti-twist flanges to keep the camera from twisting and provide a comfortable grip. Both the base plate and side plate are Arca-type compatible dovetails enable the camera to mount in a vertical or horizontal position. It secures to the bottom of the camera with a 1/4 screw and an anti-twist locating pin to prevent twisting.

SmallRig Offset Kit for BMPCC 4K & 6K and Ronin S Crane 2 Moza Air 2 BSS2403 is designed to provide more clearance for the camera when mounted to gimbals. The kit includes a plate and a clamp and should be used with the original gimbal plate. Attach the plate to the camera bottom by a 1/4 screw, with anti-twist pins and rubber pads preventing wiggles and scratches; slide the clamp into the plate and fasten it by the lever; mount the whole kit to the gimbal plate. By using this kit, it’s easier . . . .

SmallRig Articulating Arm 2071 includes a ballhead with 1/4'' screw, a ballhead with NATO clamp and a ballhead clamp. It enables additional attachment for your options as per your needs and different shooting scenarios. For example, it could attach plate with 1/4''-20 threaded holes or cage with 1/4''-20 threaded holes on the one end via ballhead with 1/4'' screw, while it could also attach monitor cage with NATO rail with on the other end via ballhead with NATO clamp.

The SmallRig L Bracket for FUJIFILM X-T4 Camera LCF2811 is modular designed with anti-twist flanges to keep the camera from twisting and provide a comfortable grip. Both the base plate and side plate are Arca-type compatible dovetails enable the camera to mount in a vertical or horizontal position.

The SmallRig L-Bracket for Nikon Z 9 3714 is designed for quick switch between horizontal and vertical shooting. It is locked into the bottom of a camera via a 1/4"-20 screw and an anti-twist screw, fitted with a silicone pad to prevent scratches and deflection, and can be disassembled into an Arca-compatible base plate (used separately) and side plate, both with lens center mark.

The SmallRig L-Bracket for Fujifilm X-T3 and X-T2 Camera 2253 is a modular design with anti-twist flanges to keep the camera from twisting and comes with a wooden handgrip to makes it ergonomic to hold the camera. Both the base plate and side plate are Arca-type compatible dovetails enable the camera to mount in a vertical or horizontal position. It features a sensor centring line on each axis to align the camera on a tripod head.

SmallRig Lightweight Fluid Video Head 3457 is specially designed for videoing and photography. It features panoramic panning and is Arca-swiss QR system compatible, allowing being fitted directly with Arca-swiss cages and L brackets. You may adjust its center of gravity back and forth by turning the side knob when using large lenses or mounting camera horizontally.