The VCT Universal baseplate echoes a traditional ENG style camera with a modern twist. VCT worked well for ENG cameras but modern cameras are lighter and shorter, without a heavy tape recorder or film magazine on the back. Zacuto designers set out to create a plate that merged the stability and ease of a classic VCT with contemporary cameras and rigs.

The XShot Camera Extender eliminates awkward photos taken at arms length. Using the XShot you can take pictures anywhere without asking or handing your camera over to a stranger, take photos at unique angles, and capture 1st person videos for online video journals and travelogues.

If you use a 180mm or 200mm macro lens, you may want to extend the length of your Plamp.

The Wimberley 12" Extension is a useful set of Loc-Line segments to extend the reach of your Plamp II. It simply pops into place, but it will make the Plamp II less rigid when fully extended.

This small dovetail plate attaches to the flash bracket mounting holes on RRS and Kirk lens plates. This allows you to attach Wimberley quick-release flash brackets to the upper surface of the plate.

The Plamp Stake from Wimberley is a device which allows the Plamp II to be secured independently in various ground or turf types. The Plamp Stake consists of two components: the Ground Spike and the Extension Tube. The Ground Spike works like a high-quality custom screwdriver, allowing quick and easy placement without the need for a hammer. The Extension Tube is a high grade UV resistant plastic pipe which is designed to hold the spike.

The AK-100 also provides a stop-screw to insure that the Sidekick cannot accidentally slide out of your ball head’s quick-release clamp, if it has safety stop screw grooves (Wimberley, RRS, and Kirk clamps).

This is one of the modules of our flash bracket system. It forms the vertical upright for the F-1 Telephoto Bracket.

Use the Plamp to stabilize windblown subjects, adjust the position or angle of your subject, or move obstructing foliage. You can also use the Plamp to hold reflectors and lens shades. One day in the field with a Plamp and you will begin to realize its full potential. And now, the newly redesigned Plamp II is even better.

The Ground Plamp is an articulating arm used to hold macro subjects and other useful objects. The stake end is inserted in the ground. The opposing end (with the smaller black clip) grasps the object you wish to hold. Use the Plamp to stabilize windblown subjects, adjust the position or angle of your subject, or move obstructing foliage. You can also use the Plamp to hold reflectors and lens shades. The Ground Plamp can be anchored in a variety of ground types, creating a stable, stand-alone articulating . . . .

The P-5 is a universal camera body plate. A thin layer of texturized rubber and slightly raised mounting surfaces at the ends of the plate give the P-5 a rock-solid connection to the bottom of your camera. The P-5 is hollowed out to reduce weight, and it's heavily rounded corners make it easy on the hands.

P-10 Arca-Swiss Style Lens Plate with 3.31" long, 1 screw, and anti-twist nubs.

P-20 Arca-Swiss Style Lens Plate with 3.86" long, 1screw, and anti-twist nubs.

P-30 Arca-Swiss Style Lens Plate with 4.43" long, 2 screws, and anti-twist nubs.

This is the quick-release attachment module of the Wimberley Flash bracket system. It provides the quick-release attachment for most of our telephoto brackets and macro brackets.

For Nikon: 400 f/2.8 AF-S versions I & II, 600 f/4 AF-S version II. This custom low-profile replacement foot lowers the center of gravity of your large lens and makes it easier to pack.

For: Nikon: 600 f/4 AF-S version I. This custom low-profile replacement foot lowers the center of gravity of your large lens and makes it easier to pack. (Lowers the overall height of the lens by about 1".)

For: Canon 600 f/4 & 400 f/2.8 IS lenses. This custom low-profile replacement foot lowers the center of gravity of your large lens and makes it easier to pack. (Lowers the overall height of the lens by about 1.5".) Note: This particular plate mounts so close to the lens that it is difficult to use the plate as a handle.

The CK-100 kit allows you to replace the swing arm and platform of the Wimberley Head Version II (WH-200) with a side-mounted Wimberley quick-release clamp.

The C-12 replaces our C-10 Clamp. The geometry of the C-12's central mounting holes, combined with the large selection of fasteners that are included with the clamp allow you to securely attach the clamp to a much wider variety of equipment than any other clamp on the market.

This is module M-4 of our modular flash bracket system. This module serves as the lockable articulating arm for our macro brackets. You can also attach this module to the top of any of our telephoto brackets for added reach and positionability (useful for side lighting, or when working from a blind or car window).

This bracket positions your flash above the lens when using side-mounted gimbal heads such as the Sidekick. It attaches to an Arca-Swiss lens plate with a low-profile quick-release clamp.

This macro bracket has an articulating arm that is comprised of two double ball and socket links that lock positively and offer a great range of flash positions. The bracket attaches quickly to your lens or camera body plate with a narrow Arca-Swiss style quick-release.

The Wimberley MonoGimbal Head is a new style of monopod head. It allows you to balance your lens, preventing lens flop. The end result is a hand-held experience with the added stability of a monopod.

This bracket is the most versatile of our telephoto brackets, it attaches to the Arca-Swiss quick-release plate of any lens. It can be used on a ball head or the Wimberley Head, or can be reconfigured to work on the Sidekick. Add other modules to this bracket to add macro capability or to form a quick-flip wedding bracket.

This bracket consists of modules M1 & M3. It positions the flash above the lens when using side-mounted gimbal heads such as the Sidekick.