The CineEye 2 Pro not only transmits a wi-fi signal directly to iOS or Android devices, but now also allows for a video signal to be sent to dedicated receivers. Plug the receivers into anything with an HDMI input: professional monitors, HD televisions and projectors. The receivers can be over 1200 feet away and still give you complete control over the situation.

Replacement AC power for Atomos monitor-recorders. DC power connection is made secure with a screw thread sleeve that locks the power connection in place.

The AtomX Sync module brings professional wireless timecode and sync plus Bluetooth control to Ninja V, perfect for enhancing DSLRs, mirrorless cameras or game recordings. You can sync and/or control literally thousands of Ninja V units equipped with AtomX Sync modules on the same network at ranges of up to 300m. Multi-cam shoots have never been so easy. AtomX modules bring broadcast level standards to any HDMI camera or source, making it easy to integrate large sensor consumer cameras easily into traditional live productions.

The new AtomX SDI module for Ninja V gives creators the ability to record and output 4K video over 12G-SDI. The AtomX SDI module turns the Ninja V into the most versatile 5-inch SDI and HDMI monitor-recorder ever built. The SDI connectivity provides flexibility for any video or film production to allow all crew including directors, cinmatographers, sound recorders and focus pullers to monitor and replay identical and calibrated content in HDR at the same time.

This Atomos Accessory Kit is designed for Shogun/Ninja Inferno and Flame recording monitors. The kit includes an HPRC hard flight case to protect the recording monitor when traveling. The case features a molded interior and accomodates all of the included accessories; the USB 3.0 docking station allows you to connect multiple recording monitors to charge or transfer files to your PC; two NP-F750 5200 mAh batteries; fast charger; coiled DC barrel to D-tap and a 2.5mm to Dual 2.5mm control cable; . . . .

RACBS1 is used to control Sony cameras. RACBS1 is compatible with the 3XM, 3XD, and 3XD Pro gimbals. (Panasonic compatible cable is pictured)

The RACG1 is a charger made specifically for the SP26500 lithium ion battery. The charging input is usable with most micro USB cables, allowing for maximum flexibility while traveling. The maximum input power is DC5V, 2A. The maximum output power is double DC4.2V, 1A. This charger comes standard with the 3XM and 3XD gimbals, but can be sold as a replacement.

The RABT1 battery is a rechargeable lithium ion battery for use with the 3XM and 3XD gimbals. The capacity of each battery is 3200mAh with 3.7V voltage. The nominal power is 11.84Wh.

RACBH3 Micro HDMI cable is for use with the 3XD Pro. The cable is Micro HDMI and is used to connect a camera to the 3XD Pro's in-arm cabling port. This allows for live transmission to a monitor via the in-arm cabling. This allows for convenient monitoring and control over the cameras image and allows for easier composition and adjustments.

RACBH1 HDMI cable is for use with the 3XD Pro. The cable is full sized HDMI and is used to connect a camera to the 3XD Pro's in-arm cabling port. This allows for live transmission to a monitor via the in-arm cabling. This allows for convenient monitoring and control over the cameras image and allows for easier composition and adjustments.

RACBH2 HDMI cable is for use with the 3XD Pro. The cable is Mini HDMI and is used to connect a camera to the 3XD Pro's in-arm cabling port. This allows for live transmission to a monitor via the in-arm cabling. This allows for convenient monitoring and control over the cameras image and allows for easier composition and adjustments.

The RAPH1 is an adaptive phone holder for the 3XM gimbal. There are multiple 1/4” thread hole on the body of the holder which makes it easier to install different accessories if desired. The holder is made of CNC machined aluminum which allows for increased durability. RAPH1 compatibility is with the 3XM gimbal only.

The RAPH1 is an adaptive phone holder for the 3XM gimbal. There are multiple 1/4” thread hole on the body of the holder which makes it easier to install different accessories if desired. The holder is made of CNC machined aluminum which allows for increased durability. RAPH1 compatibility is with the 3XM gimbal only.

he RAAD2 adapter is an adjustable clamp designed for the 3XD gimbal. The body of the adaptor is round and sits around the upper handle of the 3XD. The inside of the frame is designed with foam to protect your handle from getting scratched. The lock knob can be adjusted to fit around different areas of the handle if necessary. Two 1/4” thread holes are designed to attach other gear such as an adjustable arm, a microphone, or monitor. RAAD2 is compatible with 3XD (R1) gimbals.

RAGP1 is an adapter designed for action cameras such as a GoPro. The adapter combines a clamping plate, locking harness and an additional weight for balancing. The harness can be adjusted according to the size of the action camera allowing for it to be used with multiple types of cameras. There is a 1/4-20 thread hole at the bottom of the balancing weight to attach to other equipment. The balancing weight can be detached by using an Allen key.

The MeVIDEO Livestream kit allows multiple devices or accessories to be mounted from a central point. Attach mobile phones, an LED light, audio gear, and stream simultaneously across multiple devices and streaming platforms. Four flex arms are included in multiple lengths; one at 100mm, two at 200mm and one at 300mm all featuring ¼-20” male threads on both ends. By simply adjusting the flex arm, you can mount your phone horizontally or vertically, and shoot whichever orientation you prefer.

The Blackmagic Pocket Battery Grip lets you replace the 4K and 6K model’s standard LP‑E6 battery with two L‑series batteries. The Blackmagic Pocket Camera Battery Pro Grip adds two extra NP-F570 batteries to the 6K Pro for over 3 hours of shooting on a single charge.

The new Pocket Battery Grip lets you power external flash disks allowing customers to record to the disk used for editing. It will even power the camera for over 2 hours on a single charge. As it's designed to integrate into the cameras design, it's more comfortable to hold the camera on longer shoots. Unlike regular external battery packs that hang off the camera, the Pocket Camera Battery Grip is integrated into the cameras design itself, so it doesn't add a lot of weight and it fits perfectly.

The Blackmagic Pocket Cinema Camera Pro EVF is the perfect accessory to make outdoors and handheld shooting easy! You get a high quality viewfinder with built in proximity sensor, 4 element glass diopter with an incredible -4 to +4 adjustment, built in status information, and a digital focus chart. The Pocket Cinema Camera Pro EVF connects quickly to the Blackmagic Pocket Cinema Camera 6K Pro via a single connector. The viewfinder has up to 70 degree swivel, and comes with a set of 4 eyecups including left and right eye.

The Blackmagic Pocket Cinema Camera 6K Pro includes additional pro features such as built in 2, 4 and 6 stop ND filters, adjustable tilt HDR LCD with a bright 1500 nits that’s ideal for use in bright sunlight. It also includes two mini XLR audio inputs and a larger NP-F570 style battery.

An EF to RF adapter to use the broad range of Canon EF lenses on the EOS C70 camera.

Canon PM-V1 PL Mount Kit for the Canon EOS C500 Mark II

The Canon CM-V1 EF Cinema Lock Mount incorporates the EF mount electronic contacts and allows you to mount virtually any Canon EF mount lens, either the stills variety or the cinema lens variety, on your camera. The kit includes the locking EF mount and a shim kit for precisely adjusting the mount on your camera to ensure the correct flange distance. Many of the zoom Cinema lenses require the distance from lens to the image plane be precise for the best optical and mechanical performance. This is where this Cinema lock mount comes into play.

Canon Production Accessory Kit for C700

Connect your smartphone to your remote with this USB Type-C Cable for Air 2S/Mavic Air 2/Mini 2 Remote Control from DJI. The compact design makes it easy to store inside your gear bag.

The Mavic Air 2 Battery to Power Bank Adaptor is designed to provide power from the Mavic Air 2 Intelligent Flight Battery to mobile devices such as smartphones or tablets. Use the intelligent flight battery as a power bank.

The Mavic Air 2 Battery Charger has multiple output modes including 13.2 V and 5 V. Equipped with a charging port, USB-A interface, and micro USB interface, the Battery Charger can charge batteries and the remote controller at the same time, as well as serve as an external power source for other devices.

Made specifically for Mavic Air 2. This set includes ND16, ND64, and ND256 filters. These high-quality, light reducing ND filters reduce the amount of light coming into the sensor, giving you more control of the camera's aperture, exposure time, and sensor sensitivity settings. These options offer more options in shutter speed adjustment and long exposure shooting, and effectively respond to uses such as photos, videos, and hyperlapse footage.

Made specifically for Mavic Air 2. This set includes ND4, ND8, and ND32 filters. These high-quality, light reducing ND filters reduce the amount of light coming into the sensor, giving you more control of the camera's aperture, exposure time, and sensor sensitivity settings.

When connected, Action 2 can film for up to 180 minutes and gains a microSD card slot. It’s even hot-swappable and can be used with an external microphone.