Melrose, MA  |  Cambridge, MA   |  Boston, MA  |  Holyoke, MA  |   Hanover, MA  |  Manchester, NH  |   S.Portland, ME  |  Providence, RI
| My Account | Specials | Customer Service |
CATEGORIES
BRANDS
  SORT BY  
Tripods and Monopods
#HA77 Sirui HA-77 Retractable Mini Boom Arm
The versatile HA-77 allows you to convert any tripod to a mini boom. It's the perfect accessory when an adjustable angle center column is needed and great for extending your camera directly over the subject.
$189.90

Notify when available
#HA77TZA Sirui Telescoping Horizontal Book Arm
The HA77TZA is the HA-77 bundled with the TZA-100. a 59mm Platform (with reversable ¼ 20 - 3/8 inch screw). In this configuration it will support 2 devices by removing the foam handle and installing the provided platform. A camera or tripod head can then be placed on both sides of the horizontal arm. A configuration of two parallel cameras, or a single camera that is parallel to a different device can be configured.
$199.90
#2258SR Smallrig L-Bracket for Nikon Z6 and Nikon Z7 Camera
SmallRig L-Bracket for Nikon Z6 and Nikon Z7 Camera apl2258 is a modular design with anti-twist flanges to keep the camera from twisting. The bottom plate add 16.5mm height based on the original handgrip for pinky support. Both the base plate and side plate are Arca-type compatible dovetail plates enable the camera to mount in a vertical or horizontal position. It features a sensor centering line on each axis to align the camera on a tripod head and maintains complete access to the camera's battery and ports.
$69.00

Notify when available
#2253SR Smallrig Smallrig L-Bracket for Fujifilm X-T3 and X-T2 Camera
The SmallRig L-Bracket for Fujifilm X-T3 and X-T2 Camera 2253 is a modular design with anti-twist flanges to keep the camera from twisting and comes with a wooden handgrip to makes it ergonomic to hold the camera. Both the base plate and side plate are Arca-type compatible dovetails enable the camera to mount in a vertical or horizontal position. It features a sensor centring line on each axis to align the camera on a tripod head.
$79.00

Notify when available
#PRO1802 Promaster Dovetail Macro Sliding Rail
The ProMaster Dovetail Macro Sliding Rail fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. The base of the rail attaches to a dovetail tripod head and can be slid back and forth for best positioning.
$99.95
#PRO1788 Promaster 360 Degree Dovetail or Panning Clamp
The Dovetail QR Panning Clamp adds a 360-degree upper panning ability to a tripod head, and fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. There are two ways of attaching the Dovetail QR Panning Clamp to a tripod head. It has a dovetail plate attached to its base which allows it to connect to any Arca-type receiver. Alternatively, the dovetail base can be removed; exposing a 3/8”-16 threaded port for mounting.
$99.95
#RAMA2 Benro Adjustable Arm (Payload: 22 lbs)
RAMA2 is an adjustable arm designed for use with a number of desired accessories. With a maximum payload 22lbs there are not many accessories that this arm can't hold. The folded size is 5.5 inches. The weight is 0.75 lbs and is suitable for mounting larger items such as monitors and larger lights due to the length of the arm. The arm has a 1/4”-20 standard thread.
$59.95

Notify when available
#RAMA1 Benro Adjustable Arm (Payload: 22 lbs)
RAMA1 is an adjustable arm designed for use with a number of desired accessories. With a maximum payload 22lbs there are not many accessories that this arm can't hold. The folded size is 3.5 inches. The weight is 0.5 lbs and is suitable for mounting smaller items such as microphones and lights due to the length of the arm. The arm has a 1/4”-20 standard thread.
$59.95

Notify when available
#1018PP Platypod Stackable Gooseneck (2-Pack)
Every Platypod needs bendable necks to hold onto their 1/4-20” accessories. Our goosenecks come in stackable pairs.
$30.00
#PRO3580 Promaster XC-M Shoulder Strap
This shoulder strap works with all ProMaster XC-M tripods. It quickly attaches the the machined strap slot in the yoke of an XC-M tripod using a quick release buckle. The other side of the strap slides around the lower portion of the tripod's legs like a lasso.
$19.95

Notify when available
#PRO3587 Promaster XC-M Hipster & Strap
The ProMaster Hipster and Strap works with all models of XC-M tripods. This unique system offers multiple ways of carrying a tripod. There are two parts to this system, the Hipster and the strap.
$29.95

Notify when available
#PRO3510 Promaster XC-M All Terrain Feet (Set of 3)
The PROMASTER 3510 ALL TERRAIN FEET are a serious upgrade for any XC-M tripod. Once the standard feet are removed (simply pull them off the bottom of each XC-M leg while applying a little bit of wiggle action) you can install the stainless-steel spikes into the threaded port found at the bottom of each XC-M leg. An included wrench will help you to tighten the spikes in place. These spikes are great for solid footing on ice, dirt, grass, and more. But what if you find your XC-M's legs sinking into . . . .
$29.95

Notify when available
#PRO3461 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Yellow)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95

Notify when available
#PRO3454 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Silver)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95

Notify when available
#PRO3468 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Red)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO3475 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Orange)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO4077 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Blue)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO3447 Promaster XC-M 525 Aluminum Tripod/Monopod with XC-MH30 Ball Head (Black)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$189.95
#PRO3482 Promaster XC-M 525C Carbon Fiber Tripod/Monopod with XC-MH30 Ball Head (Black)
The ProMaster XC-M 525 tripod's 5-section, transverse legs fold 180° making the entire unit just over 15" long for storage and travel. Fully extended it reaches an incredible working height of nearly 6'. Each leg's angle and length are independently adjustable, allowing the XC-M 525 to properly support your camera on uneven ground. Its dual-action ball head is strong, precise, and lightweight with an independent pan control. It has an integrated memory lock for repeatable tension control and . . . .
$269.95
#PRO3566 Promaster Carbon Fiber Extension & Macro Legs for Promaster XC-M 525 Tripods
These Carbon Fiber Extension & Macro Legs work with XC-M 525 tripods. After removing all 3 of the XC-M 522's legs they attach in their place. Now you have a choice to either reattach the legs to these extensions for added height OR attach the 3 soft feet (included) to the extensions to convert your tripod into a lightweight, super-strong macro tripod.
$39.95

Notify when available
#PRO3713 Promaster Weight Hook for Promaster XC-M 525 Tripods
This is a replacement, retractable weight hook for any XC-M 525 aluminum or carbon fiber tripod. It connects to the bottom of the center column and allows you to attach additional weight to the tripod to improve its stability.
$5.95

Notify when available
#PRO3720 Promaster Set of 3 Rubber Feet for Promaster XC-M 525 Tripods
Set of 3 replacement standard feet for any XC-M 525 aluminum or carbon fiber tripod. These are a great, inexpensive replacement set if you happen to lose or damage the standard feet on an XC-M 525 tripod.
$7.95

Notify when available
#PRO3601 Promaster Set of 3 Leg Warmers for ProMaster XC-M 525 and XC-M 525C Tripods
This 3 piece Leg Warmer set is specifically designed for use with ProMaster XC-M 525 and XC-M 525C tripods. They protect your tripod from scratches and make handling your tripod more comfortable, especially in cold weather.
$15.95

Notify when available
#PRO3538 Promaster Carbon Fiber Ground Level Adapter for Promaster XC-M 525 Tripod
This Carbon Fiber Ground Level Adapter is a great accessory for getting an XC-M 525 tripod lower and closer to the ground for macro photography and a unique perspective. In less than 30 seconds your XC-M 525 can achieve a stable position as low as just 6 1/4" / 15.88 cm.
$19.95

Notify when available
#PRO3531 Promaster Aluminum Ground Level Adapter for Promaster XC-M 525 Tripod
This Aluminum Ground Level Adapter is a great accessory for getting an XC-M 525 tripod lower and closer to the ground for macro photography and a unique perspective. In less than 30 seconds your XC-M 525 can achieve a stable position as low as just 6 1/4" / 15.88 cm.
$15.95

Notify when available
#PRO3559 Promaster Aluminum Extension & Macro Legs for Promaster XC-M 525 Tripods
These Aluminum Extension & Macro Legs work with XC-M 525 tripods. After removing all 3 of the XC-M 522's legs they attach in their place. Now you have a choice to either reattach the legs to these extensions for added height OR attach the 3 soft feet (included) to the extensions to convert your tripod into a lightweight, super-strong macro tripod.
$29.95

Notify when available
#PRO4028 Promaster Column Tilt Adapter For the Promaster XC-M 525 Tripods
This Column Tilt Adapter expands the capability of your XC-M 525 aluminum or XC-M 525C carbon fiber tripod by giving its center column the freedom to tilt 180° (90° up & 90° down). This adapter essentially converts your XC-M's center column into a multi-position, adjustable boom.
$34.95
#PRO3552 Promaster Extensions / Macro Legs for 522C Tripods
These Carbon Fiber Extension & Macro Legs work with XC-M 522 tripods. After removing all 3 of the XC-M 522's legs they attach in their place. Now you have a choice to either reattach the legs to these extensions for added height OR attach the 3 soft feet (included) to the extensions to convert your tripod into a lightweight, super-strong macro tripod.
$34.95

Notify when available
#PRO3706 Promaster Weight Hook for Promaster XC-M 522 Tripods
This is a replacement, retractable weight hook for any XC-M 522 aluminum or carbon fiber tripod. It connects to the bottom of the center column and allows you to attach additional weight to the tripod to improve its stability.
$5.95

Notify when available
#PRO3503 Promaster XC-M 522 Replacement Rubber Feet (Set of 3)
3503 is a replacement set of 3 standard feet for any XC-M 522 aluminum or carbon fiber tripod. These are a great, inexpensive replacement set if you happen to lose or damage the standard feet on an XC-M 522 tripod.
$7.95

Notify when available
  SORT BY  
LOCATIONS CUSTOMER SERVICE RESOURCES CONNECT
Sign Up for Special Deals
©Copyright 2020. Hunt's Photo & Video