Hunt's Photo & Video Photography Retailer

Yongnuo

Yongnuo Wireless iTTL Flash Trigger Kit with LED Screen for Nikon

MFR# YN622NKIT

Out of Stock

$84.99

Quantity

Included Items:

(1) YN-622N-TX Controller , (1) YN-622N-RX Transceiver, (1) User Manual, , (1) LS-2.5/N1 Shutter Connecting Cable, , (1) LS-2.5/N3 Shutter Connecting Cable

OVERVIEW

When you prepare to upgrade YN-622N-TX first time, please download the driver and software package YN_Trigger_Updater.zip, uncompress it and run YN_Trigger_Updater_Setup.exe to install the driver/software.
Download the most update firmware package and unzip it.
Turn off YN-622N-TX, keep pressing mode button and turn on it again. The screen will show firmware upgrade interface . Connect the device to your PC via a USB cable.
Run YN_Trigger_Updater from start menu. Click on "Browse..." Button and navigate to the firmware you download in step 2. Wait a few seconds until the device is detected. Click on "Update" to begin. When is done, YN-622N-TX will be reset automatically and you can use the new version now.
If any error is encountered when updating, please turn off and try again from step 3.

This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manual or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups and equipped with the AF-assist beam emitter. Support USB firmware upgrade. This manual to assume that using the compatible camera/flash and using the YN-622N transceiver with same channel. Functions supported by the product depend on the camera and flash used.Concerning the operation of YN-622N transceiver, camera and flash, please read the user manual respectively.

Specifications System type: Digital FSK 2.4GHz wireless controller Distance: 100M Channel: 7 Flash mode: i-TTL, Manual flash, Super Sync Sync mode: front-curtain sync, rear-curtain sync, Hi-speed sync(Auto FP) Groups: 3Groups (A/B/C) MAX Sync speed: 1/8000s Trigger Interface: Hot-shoe, PC Shutter release interface: 2.5MM shutter release interface USB Firmware Upgrade: support AF Assist Beam Emitter: support Battery: AAX2(support 1.2V rechargeable battery)3V Stand-by time: 120h Compatible Camera List Nikon D70/D70S/D80/D90/D200/D300/D300S/D600/D700/D800/ D3000series/D5000series/D7000series Compatible i-TTL Flash List Yongnuo: YN-465N, YN-467N, YN-468II, YN-565N, YN-568N Nikon: SB-400, SB-600, SB-700, SB-800, SB-900, SB-910.