TASCAM's DR-60DmkII, an update of the award winning DR-60D, is the audio recording solution for on-set filmmakers and videographers. The streamlined design fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limited audio quality of the camera's microphone in. ProSound Network Best of Show
The DR-60DmkII is the next generation of 4-track solid-state recording, based on TASCAM's decades of recording innovation. The upgraded HDDA microphone preamps provide up to 64dB of gain, capturing every nuance of a performance. Up to four channels at a time can be recorded to the internal SD Card, at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power, the other two use an 1/8" stereo connector for wireless and lavaliere microphones.
A Camera Output sends the mic mix to the camera for later synchronization, and a Camera Input is provided for monitoring playback. An additional headphone out and line out assist the crew during filming. The DR-60DmkII is designed for low-noise operation, including soft touch buttons and dedicated gain controls.
Multiple recording modes are available on the DR-60DmkII. Four-Channel Mode records all four microphone inputs. Dual Recording is an alternate setting, capturing a copy of your audio at a lower level for a distortion-free safety track. Menus and operation are well laid out, owing to decades of innovative recording design.
Reach beyond the limited performance of your camera's audio to capture the other half of your film. At a cost less than competing preamps, the TASCAM DR-60DmkII is the ultimate 4-track recorder designed for filmmakers, television, live events and web broadcast.
High-Quality HDDA(High Definition Discrete Architecture) Mic Preamps
High quality mic preamps are a necessity for high-grade sound. The DR-60D's HDDA mic preamplifirers utilize discrete circuitry and premium parts approved after months of evaluation tests. The HDDA s circuit achieves an incredibly high EIN (-120dBu). In addition, CIRRUS LOGIC's AD converter (made famous on the DR-40 linear PCM recorder) is installed to ensure high-lineality recording from any input signal.
4 Inputs, 3 Outputs and Simultaneous 4 Track Recording with Mixer Controls Built-In
The DR-60D can record up to 4-tracks simultaneously allowing for various mic set-ups. Inputs 1/L and 2/R can be selected for monaural operation or stereo link operation. There are 3 outputs at one's disposal. A CAMERA OUT for reference track recording to the camera, LINE OUT to run to a mixer, and a Headphone Out for direct monitoring. (In 4CH mode, 1/L and 2/R inputs cannot be selected for monaural operation.) The DR-60D supplies mixing functionality to all 4 tracks. Adjust PAN, Level, Limiters, HPF (40/80/120Hz) and Delay easily from the user-friendly set-up. TASCAM is well known for having the easiest to use controls in the market. The DR-60D is ready to use right out of the box with its external, non-menu-intensive controls.
Multiple Record Modes (Including Dual "Safety Track" Record Mode) for Self-Tailored Recording
The DR-60D can be tailored further to one's recording needs with the various record modes. Choose between:
MONO/DUAL MONO mode: These modes are ideal for single source shooting STEREO/DUAL STEREO mode: These modes are ideal for shooting with a stereo or mid-side microphone
4CH mode: This mode is ideal for all-around movie shooting. For example, you can record two sources separately plus one stereo microphone all simultaneously.
DUAL MONO and DUAL STEREO mode automatically provide a back-up safety track in case the initial levels where set too high and clips/peaks were encountered. The safety track can be set to record from -6dB to -12dB lower than the initial take.
Soft-Touch Keys to Eliminate Handling Noise and Various Other Features such as the Slate Function were Designed Specifically for DSLR Use
Every aspect of the DR-60D is designed specifically for DSLR Audio for Video Recording. The keys of the unit are designed specifically for quiet operation to eliminate handling noise. The Slate feature is designed to mark tracks easily while in production. The input and output layout is designed for versatile use. Whether the device is used under a camera, on a rig or strapped around a solitary sound engineer, TASCAM's DR-60D will meet all on-site audio production needs.
Convenient Features Ideal for DSLR Shooting
Dedicated CAMERA OUT Provides Simultaneous Recording between DSLR and the DR-60D
The CAMERA OUT connector outputs the sound mixed internally on the DR-60D. This output is equipped with an adjustable level control dial due to the lack of input level control on most DSLR's. This ensures a quality reference track is recorded onto your camera. Everything being recorded to the SD card can be sent to the camera - including slate tones - to make sync easier.
Versatile Slate Tone Generator Provides Easy-Adjustments for On-Site Movie Editing
The internal slate tone generator produces various tones for easy track making and recognition. Slate tones can be generated from 2 operation modes;
Automatic: OFF/HEAD (rec start)/HEAD + TAIL(rec start and end) (You can select duration of the slate tone: 0.5/1/2/3 sec)
Manual: Push the SLATE button for tone. (In HOLD, the SLATE button is disabled for mistake prevention.)
Channels 3 & 4 - 3.5mm Input Connector Supports High-Output Video Camera Microphones
The channels 3 and 4 input connector supports high-level maximum input up to + 10dBV and have plug-in power available. Most video camera microphones are high-level output and equipped with a 3.5mm output connector.
Tripod Socket Placed on the Bottom and a Screw for Camera Attachment Placed on Top
The DR-60D can be placed between a DSLR Camera and a tripod, or mounted to a rig easily. In addition, the bracket of the top panel can be removed when you wish to attach the DR-60D to stabilizers.
This unit has a REMOTE jack for connecting a TASCAM RC-3F footswitch-type remote control or TASCAM RC-10 wired remote control (both sold separetely) that can be used to operate the unit.